Your browser does not support JavaScript! Please enable the settings.
↑

Where to Start With Agentic AI in Financial Services: Choosing the First Workflow, the Controls and the Proof of Concept

Most banks and fintechs have AI copilots but no agent in production. This framework shows how to pick a first agentic workflow, put the controls in before the agent, and run a proof of concept that ends in a clear scale-or-stop decision.
November 18, 2026
Innovify Editorial
published on
November 18, 2026
Where to Start With Agentic AI in Financial Services: Choosing the First Workflow, the Controls and the Proof of Concept

Where to Start With Agentic AI in Financial Services: Choosing the First Workflow, the Controls and the Proof of Concept

Almost every bank, insurer and fintech now has AI somewhere in the building. Very few have an AI agent doing real work in production. The gap is not ambition or budget. It is that "start with agentic AI" is not an instruction anyone can act on. Agents are not a product you switch on; they are a way of automating a workflow end to end, which means the first decision is which workflow, and the second is what stops the agent going wrong. McKinsey's latest global banking review, as reported by Finextra, makes a related point: AI could cut banking cost bases by 20% or more, but most banks have so far only lifted individual productivity. The projection is McKinsey's, not a measured outcome. The diagnosis is the useful part. This article sets out a practical way to choose a first agentic workflow, put the controls in place before the agent, and run a proof of concept that ends in a clear decision.

Why most organisations are stuck at the copilot stage

Copilots, chat assistants and drafting tools have spread quickly because they are easy to adopt. They help an individual write, summarise or search faster, and the person remains responsible for every output. That is valuable, and it is also why the gains stay at the desk. The process around the person does not change.

An agent is different in kind. It takes a goal, plans steps, calls systems and tools, and completes work with less human involvement at each step. That is where process-level savings come from. It is also where the risk sits, because the agent is now acting, not just suggesting.

Three things keep organisations at the copilot stage:

  1. No obvious first workflow. Every team has ideas, but no shared way to rank them.
  2. Controls feel like a blocker. Risk and compliance questions arrive late and stall the project.
  3. Pilots never end. Proofs of concept run without a decision rule, so they neither scale nor stop.

The framework below addresses each in turn.

Step 1: choose the workflow, not the technology

The right first agentic workflow is rarely the most exciting one. It is the one where an agent can deliver measurable value with contained risk. The investment pattern supports this. Capital in finance and insurance is going to agents that own a defined workflow, such as underwriting or finance operations, with traceability and audit as part of the pitch, according to funding announcements reported by Finextra.

Score candidate workflows on five factors

Gather the candidate ideas from across the business, then score each one, for example from one to five, on five factors.

Volume. How often does the workflow run? Agents earn their keep on repetition. A task done twice a month is a poor first candidate, however painful.

Rule clarity. Can you write down what a good outcome looks like? Workflows with clear procedures and clear success criteria are easier to automate and to test.

Exception rate. What share of cases need judgement? A workflow where most cases are routine and a minority need a person is ideal: the agent handles the routine and routes the rest.

Reversibility. If the agent gets it wrong, how easily can the error be caught and undone? Preparing a draft, assembling a file or proposing a match is far more forgiving than releasing a payment or declining a customer.

Data access. Does the agent need systems and data you can safely give it? Workflows that need broad access to customer data or core systems are harder first projects.

The best first candidates score well on all five. Back-office and operations work often does. Northern Trust and Microsoft, for example, reported deploying an agent for client data onboarding with analysts reviewing exceptions, and said preparation time fell by 83%, according to The Paypers. The figure is company-reported and not independently verified, but the shape is instructive: a scoped workflow, a measurable cycle-time target and human review of exceptions.

Workflows that often make good first candidates

In financial services, the following tend to score well, depending on your systems and data:

  • Document preparation and onboarding file assembly, with a person approving the result
  • Reconciliation and break investigation, where the agent proposes matches and explanations
  • Accounts payable checks, where the agent validates invoices before a person releases payment
  • Internal knowledge and policy queries for operations staff, with sources cited
  • Complaint and case triage, where the agent classifies and routes rather than decides

Customer-facing decisions, such as declining credit or closing accounts, are usually poor first candidates. They carry the highest regulatory and reputational risk and are the hardest to reverse.

If you want an outside view on ranking, an AI Consulting engagement can run this scoring with your teams and stress-test the top candidates.

Step 2: design the controls before the agent

The fastest way to stall an agent project is to build the agent first and ask risk afterwards. The faster route is the opposite: agree the controls, then build an agent that operates inside them.

Use support, automate or abstain per task

The FCA's "AI in financial services: good practice and areas for improvement", published in October 2026, says existing rules apply and frames AI use as support, automate or abstain. Apply that per task within your chosen workflow, not to the workflow as a whole:

  • Support: the agent prepares, a person decides.
  • Automate: the agent acts alone, within limits.
  • Abstain: the agent must not act and hands over.

Most first deployments should be weighted heavily towards support, with automation earned task by task from evidence.

Agree five controls upfront

  1. Scope. The systems, data and actions the agent may use. Nothing else.
  2. Approval points. Which actions need a person to sign off.
  3. Stop rules. Conditions under which the agent must stop and hand over, such as conflicting evidence, missing data or low confidence.
  4. Decision log. A readable record of what the agent did, on what inputs, with what outcome.
  5. Accountable owner. A named person who owns the agent's behaviour and can pause it.

Writing these down first changes the conversation with risk and compliance. Instead of being asked to approve an unknown, they are asked to agree a design.

Step 3: run a proof of concept that is built to decide

A proof of concept for an agent should answer one question: should we put this into production, change it, or stop? Many pilots fail because they were never designed to answer it.

Set the decision rule before you start

Before building anything, agree:

  • The metric that matters, such as cycle time, error rate, share of cases handled without escalation or analyst hours saved
  • The threshold for each, that would justify scaling
  • The time box, typically weeks rather than months
  • The evidence you will collect from real users, not just test data

Test consistency, not just capability

An agent that succeeds once has not proved much. Visa's own benchmark of AI shopping agents, published in November 2026, found that 22 models failed roughly 43% of realistic test runs, with consistency the stated failure point. The benchmark was Visa's and concerned shopping, not banking operations, but the lesson transfers. Run the agent repeatedly on representative cases, including the awkward ones, and measure how often it gets the right outcome and how reliably it stops when it should.

Involve the people who do the work

The operations staff who run the workflow today know where the exceptions are. Involve them in building test cases and in reviewing the agent's outputs. Their confidence is often the real test of whether the agent can go live.

End with a business case, not a demo

The output of the proof of concept should be a short business case: what was tested, what was measured, how it compared with the threshold, what controls are in place, what it would cost to run in production, and a recommendation. That is what a funding committee can act on.

Questions a sponsor should ask before approving the first agent

Before signing off a first agentic project, an executive sponsor can test its readiness with six questions. If the team cannot answer one clearly, that is the work to do next.

  1. Which workflow, and why does it score better than the alternatives?
  2. Which tasks will the agent support, automate or abstain from?
  3. What exactly can it reach, and what can it never touch?
  4. Who owns its behaviour, and how do they pause it?
  5. What metric and threshold will decide whether we scale it?
  6. Where do escalated cases go, and who handles them?

Common mistakes on the first agentic project

  • Picking the flagship idea. The most visible use case is often the riskiest. Start where you can win and learn.
  • Treating the agent as the product. The product is the redesigned workflow. The agent is one component of it.
  • Skipping the exception path. Design where escalated cases go, who handles them and how quickly. An agent that escalates into a void creates a new backlog.
  • Measuring activity, not outcomes. Count cycle time and error rates, not prompts or conversations.
  • No owner. If nobody can pause the agent, nobody owns it.

Where Innovify fits

Innovify helps mid to large businesses take AI products from pilot to production, with compliance designed in from day one. Innovify AI Labs lets enterprise teams run several proofs of concept in parallel, test with real users and finish with a business case ready for funding. For a first agentic project, that means scoring candidate workflows, agreeing controls with risk before building, and running time-boxed proofs of concept that end in a clear scale, change or stop decision.

FAQ

Where should a bank or fintech start with agentic AI?

Start with one high-volume, rule-clear workflow where most cases are routine, errors are easy to reverse and the agent needs limited data access. Back-office tasks such as onboarding file assembly, reconciliation or invoice checks often fit. Agree the controls first, then run a time-boxed proof of concept with a decision rule.

What makes a good first agentic AI use case?

A good first use case scores well on volume, rule clarity, a manageable exception rate, reversibility and safe data access. It delivers measurable value, such as shorter cycle times, while keeping risk contained. Customer-facing decisions like declining credit are usually poor first candidates.

How is an AI agent different from a copilot?

A copilot helps an individual work faster while the person remains responsible for each output. An agent takes a goal, plans steps, calls systems and completes work with less human involvement. That is why agents can change whole processes, and also why they need explicit controls.

What controls should be in place before deploying an AI agent?

Agree the agent's scope, the actions that need human approval, the stop rules for handing over, a readable decision log and a named accountable owner. Apply the FCA's support, automate or abstain framing to each task within the workflow, and earn automation from evidence.

How long should an agentic AI proof of concept take?

It should be time-boxed, typically in weeks rather than months, with the metric, threshold and evidence agreed before work starts. The aim is a decision to scale, change or stop, supported by a short business case, not an open-ended experiment.

Conclusion

Starting with agentic AI is a workflow decision, not a technology decision. Pick a workflow where volume is high, rules are clear and mistakes are reversible. Agree the controls before you build. Run a proof of concept with a decision rule and real users, and end it with a business case. Done that way, the first agent is not just a pilot. It is the pattern for every one that follows.

Related reading

Connect With Us

Let’s Build Something Exceptional

Innovify transforms ideas into scalable, impactful products by integrating user centered design, AI-native engineering, data-back growth and lean agile methodologies. Our close client collaboration complemented with on-shore and nearshore delivery creates speed, clarity, and success at scale.
Discuss your project